KW Coilover Kit V1 FR-S/BRZ KW Coilover Kit V1 FR-S/BRZ KW The KW Variant 1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers. The result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW Variant 1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite Adjustment -ollar. KW Variant 1 INOX-LINE coilover rewards the sporty driver with its pre-configured setup. For each vehicle, our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW fine tune each application on the Nurburgring Nordschleife and at the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology -hat was all developed in-house. With the KW Variant 1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving. For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers made in Germany. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty.This Part Fits: Year Make Model Submodel 2013-2016 Scion FR-S Base 2013-2020 Subaru BRZ Limited 2013-2019 Subaru BRZ Premium 2015 Subaru BRZ Series.Blue 2016 Subaru BRZ Series.HyperBlue 2018,2020 Subaru BRZ TS 2017-2020 Toyota 86 Base 2018-2020 Toyota 86 GT 2017 Toyota 86 Special Edition 2019 Toyota 86 TRD Special Edition
KW

KW Coilover Kit V1 FR-S/BRZ

Code: KWS10258004
Add Your Review
$1,634.99
In Stock
Add to Wishlist
Category: Coilovers
The KW Variant 1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers. The result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW Variant 1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite Adjustment -ollar. KW Variant 1 INOX-LINE coilover rewards the sporty driver with its pre-configured setup. For each vehicle, our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW fine tune each application on the Nurburgring Nordschleife and at the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology -hat was all developed in-house. With the KW Variant 1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving. For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers made in Germany. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty.

This Part Fits:

Year Make Model Submodel
2013-2016 Scion FR-S Base
2013-2020 Subaru BRZ Limited
2013-2019 Subaru BRZ Premium
2015 Subaru BRZ Series.Blue
2016 Subaru BRZ Series.HyperBlue
2018,2020 Subaru BRZ TS
2017-2020 Toyota 86 Base
2018-2020 Toyota 86 GT
2017 Toyota 86 Special Edition
2019 Toyota 86 TRD Special Edition
The KW Variant 1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers. The result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW Variant 1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite Adjustment -ollar. KW Variant 1 INOX-LINE coilover rewards the sporty driver with its pre-configured setup. For each vehicle, our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW fine tune each application on the Nurburgring Nordschleife and at the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology -hat was all developed in-house. With the KW Variant 1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving. For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers made in Germany. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty.

This Part Fits:

Year Make Model Submodel
2013-2016 Scion FR-S Base
2013-2020 Subaru BRZ Limited
2013-2019 Subaru BRZ Premium
2015 Subaru BRZ Series.Blue
2016 Subaru BRZ Series.HyperBlue
2018,2020 Subaru BRZ TS
2017-2020 Toyota 86 Base
2018-2020 Toyota 86 GT
2017 Toyota 86 Special Edition
2019 Toyota 86 TRD Special Edition